# How to send third-party G-code files with Rotrics Studio?

#### 1) Connect to Rotrics Studio(V0.1.1 and above)

![](https://2132465959-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LtPFIBncU5l4J8tl5Yh%2F-MCBQwjZ1r_0slFjME13%2F-MCBYavZ4ewzvOg-3Q7b%2Fimage.png?alt=media\&token=d2508046-451c-456b-b743-8abb76d65dc8)

#### 2) Click Basic -> G-code -> Import G-code -> Select the right module

![](https://2132465959-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LtPFIBncU5l4J8tl5Yh%2F-MCBQwjZ1r_0slFjME13%2F-MCBZmTtkN7YHQTQIUHp%2Fimage.png?alt=media\&token=5a4fa40b-8c37-44eb-834b-2b5e7f7b9ded)

#### 3) Click Basic -> Control to Set Work Height

![](https://2132465959-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LtPFIBncU5l4J8tl5Yh%2F-MHVwMcYFPHbYYHSNd-p%2F-MHVxrjYogal4WzN-YxR%2F22.png?alt=media\&token=53302048-be9b-4fb4-8961-ab6c01317579)

#### 4) Go back to G-code and start sending G-code

![](https://2132465959-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LtPFIBncU5l4J8tl5Yh%2F-MCBQwjZ1r_0slFjME13%2F-MCB_XyTZSru2dVB1Ed5%2Fimage.png?alt=media\&token=2d584e4b-46bd-4ad9-9240-edb673c30074)