# \[Marlin] M203 - Set Max Feedrate {% hint style="success" %} **📅Update: 2020/09/18** {% endhint %} ## Description Set the max feedrate for one or more axes (in current units-per-second). ## Notes * View the current setting with [`M503`](https://app.gitbook.com/docs/gcode/M503.html). * If `EEPROM_SETTINGS` is enabled, these are saved with [`M500`](https://app.gitbook.com/docs/gcode/M500.html), loaded with [`M501`](https://app.gitbook.com/docs/gcode/M501.html), and reset with [`M502`](https://app.gitbook.com/docs/gcode/M502.html). ## Usage `M203` `[E]` `[T]` `[X]` `[Y]` `[Z]` ### Parameters * `[E]` E axis max feedrate * `[T]` Target extruder (Requires DISTINCT\_E\_FACTORS) * `[X]` X axis max feedrate * `[Y]` Y axis max feedrate * `[Z]` Z axis max feedrate ## Examples Set max feedrate for XY to 100mm/s: ``` M203 X100 Y100 ``` --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://manual.rotrics.com/gcode/marlin-original-commands/marlin-m203-set-max-feedrate.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.