How to upgrade DexArm's firmware?

With Rotrics Studio V0.1.2 or above

1) Download Rotrics Studio - https://www.rotrics.com/pages/download

2) Go to the Setting page and click update.

*Don't use any VPN service during upgrading.

3) Wait for the upgrade process complete.

During the upgrade process, DexArm will be disconnected, don't worry it will reconnect in the next few seconds.

💡If it is stuck in load firmware more than 1 minute, reconnect DexArm, and try again.

Once reconnect, it will pop up a window to upgrade firmware.

If failed to upgrade, check this troubleshooting to upgrade with 3rd party software - HERE.