Touchscreen
Last updated
Last updated
📅Update: 2020/05/17
Rotrics 3.5-inch touchscreen can control robot arm motion and module functions. You can also download G-code files into SD card, and use touchscreen to control offline.
Wi-Fi Connection
Wi-Fi connection status icon, press to check Wi-Fi connection status,
Return
The return button, press to return to the previous menu,
HOME
The homepage button, press to return to homepage,
Emergency Stop
The emergency stop botton, press to stop robot arm, use only in emergencies,
Basic
The basic control interface, to control robot arm movement in X, Y, Z axis, or reset robot arm to origin position,
Laser
The laser control interface, to control robot arm movement in X, Y, Z axis and power on/off laser, mainly used for adjusting laser focus length,
Draw
The drawing interface, to select built-in stick figure to draw. It is mainly used to teach children.
3D Printing
The 3D printing control interface, to change filaments,
Air Pick
The air pump box control interface, to control action of suction cup and softgripper,
Voice
The voice recognition function interface, press to start recognize your voice,
Teach&Play
The teaching-playback function interface, to teach robot arm to record and repeat your movement,
SD Card
The SD card management interface, to choose relevant G-code file and start writing/drawing, laser engraving, 3D printing or picking/placing offline,
Setting
The setting interface, to choose language, set leveling, adjust pen height, or reset the touchscreen.
X±/Y±/Z±
Control the movement in X, Y, Z axis, click to control movement in relevant direction,
Home
Working HOME position button, click to return robot arm to the HOME position,
Reset
Robot Arm calibration button, click to re-calibrate the robot arm.
Motor Disable
Motor disable button, click to disable the motor, drag the robot arm to the corresponding position.
Laser ON/OFF
Laser on/off button, click to turn on or turn off the laser. The default setting is to turn on/off laser under the max power. Wear the Safety Goggles before you set up the laser engraver and throughout the laser engraving process.
Click the left and right triangle buttons to switch pictures, click "Choose" to select the relevant picture.
Start / Pause / Stop
Click the corresponding button to start, pause, stop the current working.
Target Temp
Target temperature of 3D printing nozzle,
Current Temp
Current temperature of 3D pinting nozzle,
Change PLA
PLA filament change button, click to preheat nozzle to 200℃, after temperature reaches 200℃, you can change the filament,
Change ABS
ABS filament change button, click to preheat nozzle to 240℃, after temperature reaches 240℃, you can change the filament,
Pick/Place
Pick and place button, click to control suction cup or softgripper to pick/place items,
Stop
Click to stop air pump box,
Voice recognition button, Wi-Fi connection required, support multi-language. Click to recognize voice content, and then command robot arm to complete relevant tasks. Currently, only the built-in picture drawing functions are available.
The G-code excution interface, click to choose relevant G-code and start working.
Setting interface of the touchscreen, click to adjust pen height, set 3D printing leveling, connect to Wi-Fi, change language, reset the touchscreen.
Use dual Type-C cable to connect robot arm and the touchscreen.
Click the following link to learn how to use touchscreen to adjust laser focal length, change 3D printing filament, leveling:
adjust laser focal length
3D printing work origin position setting
leveling
3D printing filament change
control pneumatic module
control teach&play
1. connect touchscreen to the robot arm
2. Click Basic
3. Click Hometo move robot arm to HOME position
4. Click X, Y, Z button to control robot arm movement.
1. Copy the G-code file into SD card
2. Set paremeters before run the G-code file
For laser engraving, maker sure you have adjusted the focal length and set the origin position
For writing/drawing, make sure you have set the start height value
For 3D printing, make sure you have set the start height
3. Click SD card
4. Choose your G-code file
5. Click Startto work offline
Touchscreen recalibration is added in Touchscreen firmware V1.1.0 or above. Please confirm your touchscreen firmware version before recalibration.
Method 1: Touchscreen > Setting > Factory Reset > Touchscreen Recalibration
Method 2： Add an empty file named "touchscreen_recalibration.conf" to the directory: sdcard\firmware. If the Touchscreen reads this file during startup, it will enter the recalibration.
For G-code generated by Rotrics Studio, the working start point is X0 Y300. So when 3D printing with the touchscreen, you need to set G92 Z0 E0 (Set WorkHeight).
For G-code generated by third-party software, like Cura, the working start point is X0 Y0. So when 3D printing with the touchscreen, you need to set G92 X0 Y0 Z0 E0 (Set WorkOrigin/ Set Origin).
Note: if you set the working start point wrongly, the Arm movement will beyond limits, or when you click start to start printing, only the filament squeezes out, the Arm won't move.
